ICB Custom Medical Orthotics

Walking on concrete, paving and other hard surfaces cannot be avoided. These surfaces do not support the foot's structure appropriately and can cuase the feet to collapse, or roll inwards - a condition called excessive pronation. Because the foot does not get hte necessary support from the ground, the arch will flatten to make contact with the ground.

ICB Orthotics' unique devices assist the practitioner in re-aligning the foundation of the body to its correct biomechanical position.

ICB Orthotics are specially designed to treat and relieve pain from a myriad of conditions, including:

Flat feet
Heel Spur
Metatarsalgia
Planter Fasciitis
Corns and callouses
Bunions
Shin pain
Knee pain
Leg pain
Hip pain
Low back pain
Pronation

Covers

The following can be ordered WITH or WITHOUT the covering on the top of the orthotic (example of cover shown in first picture):

Blue - 2/3 Length
Blue - Full Length
Green - 2/3 Length
Green - Full Length
Dual density - 2/3 Length
Dual density - Full Length

Practitioners

ICB Heat moulding orthotics are the most technological advanced orthotics that can be tailored to meet your patient's individual requirements. ICB orthotics are manufactured from the highest quality materials and can be easily fitted in a matter of minutes. ICB orthotics are available in 3 densities: soft, mid and firm, in addition to a World First Dual Density orthotic. ICB Dual Density orthotics offer the rearfoot and arch control of firm density EVa combined with the comfort of mid density EVA in the mid-foot area. ICB orthotics are also available in 4 models to fit various shoe styles.

ICB Features

50 intrinsic rearfoot varus angle - promoting the best angle for optimum performance.
420 Saggital Inclinator - allows balance and co-ordination together with pelvic control and stability.
Triangular shaft - enables weight to be dispearsed accross the individual bones of the foot through its unique Weight Distribution System (WDS)
Closed Cell Construction - No air bubbles means there is no compression or distortion of the orthotic

ICB Density Guide

White

Are a soft density product best used for elderly patients, diabetics and arthritis sufferers who weigh 45kg plus. Being made of a softer EVA, patients are able to adjust easily to the mild functional control offered by maintaining the optimum biomechanical angles.

Blue

Are a medium density device ideal for use in sports shoes, providing great biomechanical control for patients weighing 65-75kg.

Green

Are a firm density product recommended for all round use in patients weighing 75kg and above. The best corrective action in the lower limb is achieved when using the Green density orthotic as it achieves maximum control.

ICB Orthotics

This model finishes behind the metatarsal heads of the foot. 2/3 length orthotics are designed to fit in most mens shoes and ladies' wide fitting flat footwear.

ICB Full length orthotics

Excellent for sports shoes, work boots, and hiking boots. Extending to the end of the toes this model provides comfort and additional protection. Just remove the exisiting innersoles and insert the ICB Full Length Orthotics.

Dual density orthotic

All the control you need combined with the comfort you want, in a world first orthotic. The ICB Dual Density Orthotic provides rear foot and arch control made from a higher density EVA, combined with the comfort of a softer mid density EVA. The result is comfort and control in the gait cycle from heel strike, midstance to toe off. Pictured: Dual Density Full Length with Cover

ICB High Heel Orthotics

Purpose built to fit into ladies high heel footwear. It features 30 rearfoot varus post, and exhibits the same triangular shaft design as the rest of the range, which supports the transverse and longtitudinal arch of the foot , finishing inder the second, third, and fourth metatarsal heads area. The high heel model is most effective when worn in shoes with a 15-20mm heel or higher.

ICB Dress Orthotics

Designed specifically for dress shoes. The dress orthotic features a 5th metatarsal cut away - a styloid process deflection (5th ray) section for easy fitting in naroow / dress shoes, including mens loafers and ladies court style shoes.

Why ICB Orthotics?

ICB Orthotics are 100% EVA with a closed cell construction, making moulding easier, and prevents compression of the orthotic, thus retaining its supportive function.

The 42° Saggittal Inclinator places the foot in the ideal position for proper foot function - the Subtular Joint Neutral Position. Placing the foot in subtalar joint neutral also aids in correctly aligning the rest of the body.

Heat Moulding

To achieve a customised orthotic, ICB Orthotics should be heated on the plantar surface only and fitted by the practitioner - this will ensure optimium patient treatment results. For further information ICB Orthotics website - Fitting

To Purchase:

For any purchasing enquiries please call our friendly customer service team on 1300 785 786

SIZING

	AUS / USA		UK		Europe
	MEN	WOMEN	MEN	WOMEN	MEN	WOMEN
Toddler	K4 - 6	K4 -6	K4 -6	K4 -6	20 - 23	20 - 23
Kids	K7 - 9	K7 - 9	K7 - 9	K7 - 9	24 - 27	24 - 27
Small Junior	K10-12	K10-12	K10-12	K10-12	28 - 31	28 - 31
Junior	1 - 3	1.5 - 4	1 - 2.5	1.5 - 3	32 - 35	32 - 35
X Small	3.5 - 5	5 - 6	3 - 4.5	3.5 - 5	36 - 38	36 - 38
Small	5.5 - 7	7 - 8	5 - 6	5.5 - 7	39 - 41	39 - 41
Medium	7.5 - 9	9 - 10	7 - 8.5	7.5 - 9	42 - 43	42 - 43
Large	10 - 11	11 - 12	9 - 10.5	9.5 - 11	44 - 45	44 - 45
X Large	11.5 - 13	12.5 - 13	11 - 12	11.5 - 12	46 - 47	46 - 47
XX Large	13.5 - 15	13.5 - 14	13 - 14.5	12.5 - 14	48 - 50	48 - 50