Rehband Mouldable Thumboform Thumb Support

The Rehband Thumboform Short thumb support comes with a mouldable insert. It stabilises the CMC and MCP Joint of the thumb. It is indicated for rheumatoid arthritis, osteoarthritis, or for support after injury. Materials consist of neoprene, polyamide jersey, Turbocast (mouldable splint).
Instructions for applying the support
- 1) Place the plastic insert in the pocket
- 2) Pour hot water (approximately 75°) into the pocket, wait until the plastic is mouldable, dry with a towel.
- 3) Apply the brace and close the velcro carefully. Mould the plastic and wait until it gets stiff. Let dry and the brace is ready to use.
- 4) Apply the brace, close the Velcro and adjust the thumb grip.













