Neurotrac 3 Digital Dual Channel Tens Unit
The NeuroTrac 3T is an advanced and modern TENS unit.
Features and Benefits
- LCD displays Intensity, Rate, Pulse Width, Time and programme mode.
- Dual channel.
- Time setting between 1 min and 12 hours. Time count down monitored on LCD screen.
- Constant current. [Extends battery life].
- Conventional, Burst and Modulated modes.
- Range: Rate 2 -200Hz - Pulse Width: 50- 300µS.
- Automatic switch off after 4 minutes if unit is not in use.
- Pause.
- Click here to buy replacement leads
Included in the box
When you purchase the Neurotrac Tens Machine from Sportstek, the unit is shipped with everything you need to get started:
- Neurotrac Digital Tens Machine
- 4 pre-gelled electrodes / pads
- leads
- battery
- instruction manual
Exclusive 3 Year Warranty
This TENS machine is backed with our exclusive 3 YEAR WARRANTY. Should the unit fail in this time period return it to us and we will either replace the unit or refund your money.(NB: Warranty does not apply to connection leads or electrodes)
Click here to buy the Neurotrac 3 TENS Machine
How Does TENS Relieve Pain?
When we feel pain it is the body's process of informing us that something is wrong. To feel pain is important, without this feeling abnormal conditions may go undetected, creating damage or injury to critical parts of the body.
Conductive electrodes are used to transmit electrical impulses from the stimulator to the nerve fibres. Pain relief is achieved by using TENS stimulation of the nerve fibres and acts as a 'Gate Control' to block pain transmission. Using low frequency 'Burst' Stimulation, can increase the body's own pain relieving endorphins/enkepalins and provides analgesia.
TREATMENT PROTOCOLS
Constant (Conventional) {High Rate} Mode
This is the most frequently used mode. High Rate Tens {80 - 150Hz} is generally preferred for long- term management of chronic pain and for controlling the dull throbbing pain associated with acute and post-operative pain. A rate of 80Hz and pulse width of 200µS is good setting to begin with.Burst Mode
This mode uses a series of higher-frequency pulses delivered in bursts at a low rate {2Hz}. It is used as an alternative to the Low Rate Stimulation. Some patients consider this more comfortable.
Modulation Mode
This mode progressively alters the frequency and pulse width to produce a rhythmic, massaging sensation at the stimulation site. This mode is another alternative to the conventional mode where longer wearing times are desired. Also it may help to offset accommodation of TENS stimulation some patients may experience.
Low Rate Stimulation
Low rate stimulation {2-10Hz} (constant) is generally used as a treatment modality for short-term treatment. It is often used in as an adjunct to the conventional mode or sometimes as an alternative. In low rate stimulation the intensity is turned to the maximum tolerable level in order to stimulate the deeper nerve fibres.
Brief-intense Stimulation
This type of stimulation is used primarily before or during various therapeutic procedures such as suture removal or joint mobilisation. Time of treatment is usually for short periods of 20-30 minutes.
Customer Feedback
Physiotherapy Supplies | About
us | Contact details | Privacy
& Security | Search | Feedback | Return
Policy © 2012 Sportstek All Rights Reserved.
Ph: 1300 785 786
NEW - STOCK CLEARANCE CLICK HERE
